Steering bearing set for MCB/Rex/Fram/Solifer/Tunturi etc. with closed lock nut

Complete Swedish-made handlebar bearing set with closed lock nut for models with handlebars mounted in separate handlebar holders. Made for perfect fit to Monark, MCB, Fram/King, Rex, Tunturi and Solifer frames and front forks as follows: Steering head with 30mm inner diameter (wear limit: >30.1mm) Steering crown with thread 1´´-26g / tube: Ø=25,4mm / flange: Ø=25,8mm NOTE: The steering head can often be heavily worn, especially in the lower part, this must of course be remedied before mounting the new bearing in order to achieve a perfect result! Note, however, that ovality can occur and then you have to count the section between several different measurement points. Technical data: A: Lock nut closed chromed with thread: 1"-26g B: Bearing cup upper with thread 1"-26g C: Ball ring with 15st 3/16" (4.76mm) outer diameter Ø=39mm D: Cone upper for steering head with 30mm inner diameter. E: Lower bearing cup for steering head with 30mm inner diameter. F: Ball ring with 15pcs 3/16"(4,76mm) outer diameter Ø=39mm G: Lower cone for steering crown with flange 25,8mm Cones and bowls are manufactured according to the older, for the bicycle and moped industry, current Swedish standard and hardened and electro-galvanized for very long durability. Can replace the following original numbers: Monark/MCB Lock nuts: 24865-2 Bowl, upper: 6075/5, 6110-5, 6111-5, 24878-1, 6115-5 Cone, upper: 6075/7, 6110-7, 6111-7, 24878-2, 6115-7 Ball ring: 6075/6, 1506, 1508, 24878-5, 6115-6 Bowl, lower: 6075/8, 6110-8, 6111-8, 24878-3, 6115-8 Cone, lower: 6110-9, 6111-9, 24878-4, 6115-9 Rex Lock nuts: 609 4201 Bowl, upper: 7756 Cone, upper: 7764 Ball ring: 7760, 2990 Bowl, lower: 7768 Cone, lower: 7772 Fram/King Steering bearing kit compl: 4905 Locknuts: 47/107, 48/107 Bowl, upper: 4926 Cone, upper: 4921 Ball ring: 2371 Bowl, lower: 4928 Cone, lower: 4923 Tunturi Locknut: 521.116.60 (old no.60.201) Bowl, upper: 521.111.60 (old no. 60.202) Cone, upper: 521.112.60 (old no. 60.203) Ball ring: 521.113.60 (old no. 60.204) Bowl, lower: 521.114.60 (old no. 60.205) Cone, lower: 521.115.60 (old no. 60.206) Solifer Lock nut: 1601 0261 Bowl, upper: 1601 0266 Cone, upper: 1601 0268 Ball ring: 1601 0267 Bowl, lower: 1601 0269 Cone, lower: 1601 0270 Important: The parts cannot be combined with older original parts according to the above original numbers. The new steering bearing replaces the old one as a whole, i.e. all parts must be replaced!