Steering bearing set for MCB/Rex with open lock nut, Swedish made.

Complete Swedish-made headset with open locknut for models with handlebars mounted in stem with expander. Made for perfect fit to Monark, MCB and Rex frames and front forks as follows: Steering head with 30mm inner diameter (wear limit: >30.1mm) Steering crown with thread 1´´-26g / tube: Ø=25.4mm / flange: Ø=25.8mm NOTE: The steering head can often be heavily worn, especially in the lower part, this must of course be remedied before mounting the new bearing in order to achieve a perfect result! Note, however, that ovality can occur and then you have to count the cut between several different measurement points. Technical data: A: Lock nut open chromed with thread: 1"-26g B: Bearing cup upper with thread 1"-26g C: Ball ring with 15pcs 3/16"(4,76mm) outer diameter Ø=39mm D: Cone upper for steering head with 30mm inner diameter. E: Lower bearing cup for steering head with 30mm inner diameter. F: Ball ring with 15pcs 3/16"(4,76mm) outer diameter Ø=39mm G: Lower cone for steering crown with flange 25,8mm Cones and bowls are manufactured according to the older, for the bicycle and moped industry, current Swedish standard and hardened and electro-galvanized for very long durability. Can replace the following original numbers: Monark/MCB Lock nuts: 6078/3, 6113/3 Bowl, upper: 6075/5, 6110-5, 6111-5, 24878-1, 6115-5 Cone, upper: 6075/7, 6110-7, 6111-7, 24878-2, 6115-7 Ball ring: 6075/6, 1506, 1508, 24878-5, 6115-6 Bowl, lower: 6075/8, 6110-8, 6111-8, 24878-3, 6115-8 Cone, lower: 6110-9, 6111-9, 24878-4, 6115-9 Rex Lock nuts: 7776 Bowl, upper: 7756 Cone, upper: 7764 Ball ring: 7760, 2990 Bowl, lower: 7768 Cone, lower: 7772 Important: The parts cannot be combined with older original parts according to the above original numbers. The new steering bearing replaces the old one as a whole, i.e. all parts must be replaced!