Ignition system with switch tips 6V-23W for Puch Maxi/KTM/Tunturi, Medurs

Replaces Bosch ignition system marked 0 212 122 ___ for: Puch Maxi, mainly intended for machines with brake lights. NOTE: Lamps may need to be replaced to match the specified wattage!(see below) Technical data: Flywheel, outer diameter: 116mm Stator plate, outer diameter: Ø= ca.90mm Stator plate, bolt distance c-c: ca79.mm (4 fastening holes) Ignition coil/light coil, bolt distance: c-c: ca.54mm Ignition cable: L=~400mm Light/brake coil: 6V-15-5W Tail light coil: 6V-3W For crankshaft with conicity: K1:5(20%) and input diameter ~12mm Direction of rotation: Clockwise (left side) Flywheel puller: Thread M26x1,5 Article no. 10186 Wiring diagram included for correct connection. Recommended bulbs: Front light: 6V-15/15W Rear light: 6V-3W Brake light: 6V-5W NOTE! Grease the felt that lubricates the flywheel cam to reduce wear on the switch jaw! The contact distance is set to approx. 0.35~0.45mm at fully open switch tips. Performed with the help of a blade measure Can replace the following Bosch generators: (The marking on original generators is always on the flywheel) 0212 122 024 for Puch/Tomos 6V 15-5/3W 0212 122 028 for Puch Maxi 0212 122 038 for Puch 6V 15/5/3