Ignition system with switch tips 6V-19W for Puch Maxi/KTM, clockwise, two-wire

Replaces Bosch ignition system marked 0 212 112 ___ for: Puch Maxi, mainly intended for machines without brake lights. Technical data: Stator plate, outer diameter: Ø= ca.90mm Stator plate, bolt distance c-c: ca79.mm (4 fastening holes) Ignition coil/light coil, bolt distance: c-c: ca.54mm Light coil: 6V-19W For crankshaft with conicity: K1:5(20%) and input diameter ~12mm Direction of rotation: Clockwise (left side) Flywheel puller: Thread M26x1,5 Article no. 10186 Recommended bulbs: Front light: 6V-15/15W Rear light: 6V-3~4W NOTE! Grease the felt that lubricates the flywheel cam to reduce wear on the switch jaw! The contact distance is set to approx. 0.35~0,45mm at fully open switch tips. Performed using a blade gauge Can replace the following Bosch alternators: (The marking on original generators is always on the flywheel) 0212 112 062 0212 112 084 0212 112 096 0212 112 098 The product fits KTM Hobby 2 (Puch E50) 1970-1973 Hobby 3/Duo (Puch E50/Z50) 1974- Puch Maxi 1/N/P/K without rear suspension Maxi Motor 1-speed automatic (pedal) Maxi Motor E50 1-speed automatic (Kick) Maxi S/L/K with rear suspension Maxi Sport S/MK2 Mini Maxi X30-A/Maxi Sport (1v.auto) X40