Steering bearing kit for HVA, Fram/King/MCB/Norsjö etc. for steering clamp

Complete Swedish-made steering bearing kit with open, flat locking nut for models with handlebars mounted in the steering column and where the steering crown is adapted for locking with a steering clamp. Also fits perfectly to the steering spindles in the front carriage of three-wheeled transport mopeds. Made for perfect fit to Husqvarna, MCB, Fram/King, Norsjö m.fl frames and front forks as follows: Steering head with 30mm inner diameter (wear limit: >30.1mm) Steering crown with thread 1´´-26g / tube: Ø=25.4mm / flange: Ø=25.8mm NOTE: The steering head can often be severely worn, especially in the lower part, this must of course be remedied before mounting the new bearing in order to achieve a perfect result! Note, however, that ovality can occur and then you have to count the section between several different measurement points. Technical data: A: Lock nut open, flat galvanized with thread: 1"-26g B: Bearing cup upper with thread 1"-26g C: Ball ring with 15pcs 3/16"(4,76mm) outer diameter Ø=39mm D: Cone upper for steering head with 30mm inner diameter. E: Lower bearing cup for steering head with 30mm inner diameter. F: Ball ring with 15pcs 3/16"(4,76mm) outer diameter Ø=39mm G: Lower cone for steering crown with flange 25,8mm Cones and bowls are manufactured according to the older, for the bicycle and moped industry, current Swedish standard and hardened and electro-galvanized for very long durability. Can replace the following original numbers: MCB Lock nuts: 6111-3 Bowl, upper: 6110-5, 6111-5, 6115-5 Cone, upper: 6110-7, 6111-7, 6115-7 Ball ring: 1506, 1508, 6115-6 Bowl, lower: 6110-8, 6111-8, 6115-8 Cone, lower: 6110-9, 6111-9, 6115-9 Husqvarna Lock nuts: C-13231 Bowl, upper: C-13114 Cone, upper: C-13113 Ball ring: 2940-372 Bowl, lower: C-13120 Cone, lower: C-13111 Fram/King Locknuts: 4914 Bowl, upper: 4926 Cone, upper: 4921 Ball ring: 2371 Bowl, lower: 4928 Cone, lower: 4923 Norsjö Locknuts: 66111-0003 Bowl, upper: 66115-0005 Cone, upper: 66115-0007 Ball ring: 66115-0006 Bowl, lower: 66115-0008 Cone, lower: 66115-0009 Important: The parts cannot be combined with older original parts according to the above original numbers. The new steering bearing replaces the old one as a whole, i.e. all parts must be replaced!