Ignition MVT Digital Direct - AM6
€334.80
Description
Article no.: 30473
Bottom plate/mounting ring with outer diameter 94mm
Very easy assembly!
1. Disassemble original flywheel and stator.
2. Set the piston for 40mm stroke to 0.40mm before (ÖDL) or if you have 45mm stroke to 0.35mm before (ÖDL).
3. Mount the adapter plate.
4. Mount the stator on the adapter plate.
5. Mount the rotor marking against the stator marking, NOTE! the direction of rotation.
6. Tighten the flywheel nut to the correct torque.
7.Fit ignition coil with good earth to the frame.
8. Earth yellow/green cable from stator to ignition coil.
9. Connect red/black from stator to red/black on ignition coil.
10. Connect moped stop function to white/black from ignition coil.
11. Connect yellow cable from stator to voltage regulator.
12. Insulate white cable from stator.
Base plate/mounting ring with outer diameter 94mm
MVT Digital Direct is a switchless inner rotor system with a 55w light coil.
The ignition is retarding.
Supplied with cdi-box and ignition coil.
Volume regulator needs to be purchased.
Connection instructions are included.
Make sure that the ignition system gets sufficient cooling.
The flywheel cover may need to be modified for this!
Also has a built-in speed limiter that you can choose to connect if you happen to want it.
- Secure payment by card, Swish and Paypal
- Invoice, divided payment, direct payment via Klarna
- E-mail or call us, we reply swiftly!
- ManufacturerMVT
- Manufacturer Art NoDD12
Files and media
 | Installation instructions (Swedish) |