Ignition system Kokusan 6V "Original" incl flywheel puller and nut, Puch, Zundapp, Sachs and others.
€217.50
Description
Article no.: 26512
Fits Zundapp, Kreidler, Sachs and Puch speed wind cooled models with counterclockwise rotation. If you have a fan cooler, you need to modify the flywheel yourself a little to be able to attach the fan.
Our retarder circuit 15325 naturally fits this system.
On Husqvarna flint, a spacer for the generator cover needs to be manufactured.
We have noted that on some single hand-shifted two-speed Sachs, it is tight to get a Kokusan flywheel in. Check that there is about a 7 mm margin outside your old flywheel if you want to be absolutely sure that it fits. All others fit it perfectly as far as we know.
If you want 12V, you buy the voltage regulator, e.g. with Article 14589
1.Why is the flywheel thread so small? ---- That's how they made them from the very beginning, so this is the first variant before they would be used on engines with
2.Can you charge 12V battery with it, in the same way as you can with the Evo 2 system? ---- YES it is just changing the regulator
3.Does the system in its technical structure provide 12V so that I can later replace only the 6V regulator with a 12V regulator, if I want 12V lamps and 12V horn instead? -- YES it's just changing the regulator
4.Is it only the ignition cable and the ignition cap that are missing for the system to be complete? ----- YES
5.Any specific requirement for the ignition cable and cap? E.g. with or without 5kohm resistor in the cap? ------- NO
- Secure payment by card, Swish and Paypal
- Invoice, divided payment, direct payment via Klarna
- E-mail or call us, we reply swiftly!
- BrandKokusan
Files and media
 | Attached file |