Ignition MVT Premium, Zundapp, Sachs och Puch
€314.90
Description
Article no.: 16470
Bottom plate/mounting ring with outer diameter 90mm
Mvt premium is a switchless inner rotor system with light coil of 55w.
The ignition is retarding, fits on Zundapp, Sachs and Puch.
The adapter plate may need to be modified with new holes depending on the engine type.
Supplied with combined ignition coil cdi.
Volume regulator needs to be purchased. Connection instructions are included.
Ensure that the ignition system receives sufficient cooling. The flywheel cover may need to be modified for this!
Very easy assembly!
1. Disassemble original flywheel and stator.
2. Set the piston in top (ÖD)
3. Mount the adapter plate.
4. Mount the stator on the adapter plate.
5. Mount the rotor mark against the stator mark, NOTE! the direction of rotation.
This is a basic setting and may need further adjustment.
6. Tighten the flywheel nut to the correct torque.
7. Fit the ignition coil with a good earth to the frame.
8. Earth the yellow/green cable from the stator to the ignition coil.
9.Connect red/black from stator to red/black on ignition coil.
10. Connect moped stop function to white/black from ignition coil.
11. Connect yellow cable from stator to voltage regulator.
12. Insulate white cable from stator.
- Secure payment by card, Swish and Paypal
- Invoice, divided payment, direct payment via Klarna
- E-mail or call us, we reply swiftly!
- Country of originFrance
- ManufacturerMVT