Crankshaft 2Fast 47/95mm - Minarelli

From 2Fast, Italy: Crankshaft 2Fast 47 mm stroke / 95 mm connecting rod Minarelli horizontal, advanced racing crankshaft for ambitious tuners. For 100cc setups. The crankshaft was developed for the 100cc cylinders of the 2Fast and can withstand speeds up to 20,000 rpm. It can of course also be used with other racing cylinders. By using another small end bearing with 17 mm outer diameter, the crankshaft can also be used with cylinders with 13 mm or 14 mm piston pins. Note: the engine block will need to be machined to make room for this "oversized" crankshaft. The crank webs have 79mm diameter. Technical information: for Minarelli horizontal (Yamaha Aerox etc.) stroke 47mm (original) connecting rod 95mm, crank pin 18mm small end bearing: 14x17x16,6mm crankcase milling: yes weight: 1650g Norway: Are you shopping from Norway? Then it is unfortunately the case that individual goods costing more than NOK 3000 without VAT may not be sent to Norway without you as a customer having to pay Norwegian VAT yourself when entering the country. This means that you will receive an invoice from the carrier for the VAT on this particular item and a fee. This is due to the Norwegian VOEC rules that regulate the sale of goods to Norway from abroad and this is nothing we can influence. This only applies to individual goods that cost more than 3000 NOK without VAT. All goods costing less than 3000 NOK without VAT, you pay VAT through us as usual. We apologize for this!